Definox Check and Pressure Relief Valves

SPECIFIC FEATURES FOR CHECK VALVES

• The check and pressure relief valves valve have been designed especially for the food, pharmaceutical, cosmetic and chemical industries.
• No product entrapment areas, avoiding bacteriological development - when properly installed.
• Full bore.
• Easy disassembly, without tools.
• Body is machined from solid bar.
• Low pressure drop.

Check valve has full bore opening.  The back pressure in the bore section is very low (approximately 1,3 psi).

Dimensions: 1" - 1.5" - 2" - 2.5" - 3" - 4"

Plus - Body - Spring: 304L or 316Lstainless steel

Seal: Viton, silicone, metal-to-metal, molded Viton, Teflon on fractional sizes

Valve Ends

Butt weld end

Clamp

External RA = 150 Grit

Internal RA = 180 Grit standard

400 Grit available, 10 RA

Electro polishing available

• Maximum pressure at 68^oF 145 psi
• Back pressure 90 mbar (1,3 psi)
• Permissible maximum temperature 248^oF

SPECIFIC FEATURES FOR  PRESSURE RELIEF  VALVES 

• Ideal for pump bypass loops.
• Field adjustable or factory presets

Dimensions: 1 1/2" -  2"

Plug: 316L stainless steel

Seal: Viton, or Teflon (special order)

Valve Ends

Butt weld

Clamp - special end connections also available by special order

Spring 1: 1,45 to 43 psi

Spring 2: 43 to 109 psi

Spring 3: 109 to 188 psi

~ The data on this site is as technically accurate as possible, but is subject to change and correction by Definox - as required.

Definox ~ 2001